TK Loader 100 Series – Single Motorcycle Loader
The 100 Series is a low profile motorcycle loader designed for a single motorcycle. This unit is by far the easiest to use motorcycle loader available.The low profile wheel channel is the key feature of this model. This channel, that the bike is ridden or pushed into is only 3/4″ above the pavement, is not even detectable to most people. The rider simply positions the bike in the channel, puts the kickstand down, and then secures the bike with ratchet straps. There are no pins to deal with other than the safety pin that is used to lock the device in place for transporting.The wheel channel on which the bike is secured on the TK Loader prevents low pipes from contacting the ground during the angle phase of the loading sequence, unlike loading devices where the front wheel is attached allowing the rear wheel to roll on the ground throughout the loading sequence.
There are no dangerous ramps to ride up or mechanisms that elevate the fronttire inches off the ground, as some motorcycle loaders require. Those types of procedures can be very intimidating for riders, especially those with short legs or new riders that are unfamiliar with balancing a heavy motorcycle.The TK Loader offers a safe, easy solution for any rider. Anyone can complete the loading process in about five minutes-guaranteed! After the bike is elevated, the loader’s semi-automatic operation requires the user to simply push the bike into the truck bed. The unique ball bearing glide system allows an average person to push about 10 times their own weight with the pickup sitting level.The patented TK Loader system is by far the easiest motorcycle loader to install or remove on the market. The optional quick install mounting brackets allow the unit to be installed or removed in less time than it takes to hook up a trailer, in manyinstances. The TK Loader can be used in conjunction with most trailers, even when installed in a mid-sized short bed pickup.